Difference between revisions of "KISS DP-558 Powersupply Modification"

From KiSS DP 558 STAGE2 WiKi
Jump to: navigation, search
(Created page with "KISS DP-558 Powersupply Modification This page gives a step by step guide for modification of the KISS DP-558 Power Supply due to leaking/defective PSU capacitors. The KISS ...")
 
m (Protected "KISS DP-558 Powersupply Modification" ([edit=sysop] (indefinite) [move=sysop] (indefinite)) [cascading])
 
(22 intermediate revisions by the same user not shown)
Line 1: Line 1:
KISS DP-558 Powersupply Modification
 
  
 
This page gives a step by step guide for modification of the KISS DP-558 Power Supply due to leaking/defective PSU capacitors.
 
This page gives a step by step guide for modification of the KISS DP-558 Power Supply due to leaking/defective PSU capacitors.
Line 9: Line 8:
 
Please observe, that making any modifications the the KISS DP-558 will void the warrenty, so proceed at own risk
 
Please observe, that making any modifications the the KISS DP-558 will void the warrenty, so proceed at own risk
  
KISS DP-558 is a high end harddisk recorder, with internet connection and FTP server and integrated online EPG (electronic Program Guide).
+
KISS DP-558 is a highend harddisk recorder, with internet connection and FTP server and integrated online EPG (electronic Program Guide).
  
 
The DP-558 basically consist of a Powersupply unit, a main computer board, one DVD drive, one harddisk and a front unit
 
The DP-558 basically consist of a Powersupply unit, a main computer board, one DVD drive, one harddisk and a front unit
Line 15: Line 14:
 
The harddisk is supplied by a +12 Volt (yellow) and +5 Volt (red). Ground is wired as black. When this type of error occures, both +12 volt and +5 volt linies drop in voltage. To make sure this fix is nessary for your type of error, check for the following symptoms:
 
The harddisk is supplied by a +12 Volt (yellow) and +5 Volt (red). Ground is wired as black. When this type of error occures, both +12 volt and +5 volt linies drop in voltage. To make sure this fix is nessary for your type of error, check for the following symptoms:
  
Typical symptoms to look for:
+
''' Typical symptoms to look for: '''
LCD Displays only: "KISS DVD"
+
* LCD Displays only: "KISS DVD"
LCD Displays only: "BOOT ERR"
+
* LCD Displays only: "BOOT ERR
Harddisk does not spin up when unit is powered on
+
* Harddisk does not spin up when unit is powered on
It is not possible to open DVD drive
+
* It is not possible to open DVD drive
No reaction to remote control
+
* No reaction to remote control
Display illumination is lower than usual
+
* Display illumination is lower than usual
Capacitors C19,C20,C15 of PSU may show leakage
+
* Capacitors C19,C20,C15 of PSU may show leakage
+12 volt and +5 volt supply to the KISS DP-558 harddisk is low (e.g 11 and 3 volt)
+
* +12 volt and +5 volt supply to the KISS DP-558 harddisk is low (e.g 11 and 3 volt)
  
Step by step guide to KISS DP-558 Power Supply Modification/Fix
 
Step 1:
 
Remove mains power line, and wait at least 30 minutes before any repair is started. Step 2:
 
Remove cover of the unit. Step 3:
 
Located the Power Supply Module (PSU). PSU Type mus be: Achme AM561B
 
  
Step 4:
+
----
 +
''' Step 1:
 +
Remove mains power line, and wait at least 30 minutes before any repair is started.
 +
----
 +
 
 +
''' Step 2:
 +
Remove cover of the unit.
 +
----
 +
 
 +
''' Step 3:
 +
Located the Power Supply Module (PSU). PSU Type must be: Achme AM561B
 +
 
 +
[[File:PSU_dp558.jpg]]
 +
----
 +
 
 +
''' Step 4:
 
Disconnet the 4 power connectors from PSU module
 
Disconnet the 4 power connectors from PSU module
 +
----
  
Step 5:
+
''' Step 5:
 
Remove the 4 screws mounting the PSU to chassie
 
Remove the 4 screws mounting the PSU to chassie
 +
----
  
Step 6:
+
''' Step 6:
 
Located capacitor C19,C20 and C15
 
Located capacitor C19,C20 and C15
  
 +
[[File:capacitor.jpg]]
 +
----
  
Step 7:
+
''' Step 7:
 
Remove the Capacitors C19,C20 and C15
 
Remove the Capacitors C19,C20 and C15
  
 +
[[File:remove_capacitor.jpg]]
 +
----
  
Step 6:
+
''' Step 8:
 
Replace the capacitors as followes (please observe polarity of capacitors +/-):
 
Replace the capacitors as followes (please observe polarity of capacitors +/-):
C15 1000 uF 16V 105C (Type: WGR Radial, Low impedance)
+
* C15 1000 uF 16V 105C (Type: WGR Radial, Low impedance)
C19 2200 uF 16V 105C (Type: WGR Radial, Low impedance)
+
* C19 2200 uF 16V 105C (Type: WGR Radial, Low impedance)
C20 1000 uF 16V 105C (Type: WGR Radial, Low impedance)
+
* C20 1000 uF 16V 105C (Type: WGR Radial, Low impedance)
 
+
[[File:old_capacitor.jpg]]
 +
----
  
Step 9:
+
''' Step 9:
 
Reassemble the unit.
 
Reassemble the unit.
  
 
Final Note: it may be a good idea to replace other capacitors if they show sign of leakage. Please also note that a capacitor may be out of order even if it show not sign of leakage.
 
Final Note: it may be a good idea to replace other capacitors if they show sign of leakage. Please also note that a capacitor may be out of order even if it show not sign of leakage.

Latest revision as of 19:40, 22 February 2012

This page gives a step by step guide for modification of the KISS DP-558 Power Supply due to leaking/defective PSU capacitors.

The KISS DP-558 power supply has a construction error, that makes it fail, typically after beeing used 24/7 ranging from 1-3 years. The problem is proberly caused by the extensive heat that the unit generates combined low voltage capacitors (10 volt).

Mine failed after 2 years and 8 month beeing used 24/7.

Please observe, that making any modifications the the KISS DP-558 will void the warrenty, so proceed at own risk

KISS DP-558 is a highend harddisk recorder, with internet connection and FTP server and integrated online EPG (electronic Program Guide).

The DP-558 basically consist of a Powersupply unit, a main computer board, one DVD drive, one harddisk and a front unit

The harddisk is supplied by a +12 Volt (yellow) and +5 Volt (red). Ground is wired as black. When this type of error occures, both +12 volt and +5 volt linies drop in voltage. To make sure this fix is nessary for your type of error, check for the following symptoms:

Typical symptoms to look for:

  • LCD Displays only: "KISS DVD"
  • LCD Displays only: "BOOT ERR
  • Harddisk does not spin up when unit is powered on
  • It is not possible to open DVD drive
  • No reaction to remote control
  • Display illumination is lower than usual
  • Capacitors C19,C20,C15 of PSU may show leakage
  • +12 volt and +5 volt supply to the KISS DP-558 harddisk is low (e.g 11 and 3 volt)



Step 1: Remove mains power line, and wait at least 30 minutes before any repair is started.


Step 2: Remove cover of the unit.


Step 3: Located the Power Supply Module (PSU). PSU Type must be: Achme AM561B

PSU dp558.jpg


Step 4: Disconnet the 4 power connectors from PSU module


Step 5: Remove the 4 screws mounting the PSU to chassie


Step 6: Located capacitor C19,C20 and C15

Capacitor.jpg


Step 7: Remove the Capacitors C19,C20 and C15

Remove capacitor.jpg


Step 8: Replace the capacitors as followes (please observe polarity of capacitors +/-):

  • C15 1000 uF 16V 105C (Type: WGR Radial, Low impedance)
  • C19 2200 uF 16V 105C (Type: WGR Radial, Low impedance)
  • C20 1000 uF 16V 105C (Type: WGR Radial, Low impedance)

Old capacitor.jpg


Step 9: Reassemble the unit.

Final Note: it may be a good idea to replace other capacitors if they show sign of leakage. Please also note that a capacitor may be out of order even if it show not sign of leakage.