Difference between revisions of "KISS DP-558 Powersupply Modification"
m (Protected "KISS DP-558 Powersupply Modification" ([edit=sysop] (indefinite) [move=sysop] (indefinite)) [cascading]) |
|||
| (21 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | |||
This page gives a step by step guide for modification of the KISS DP-558 Power Supply due to leaking/defective PSU capacitors. | This page gives a step by step guide for modification of the KISS DP-558 Power Supply due to leaking/defective PSU capacitors. | ||
| Line 9: | Line 8: | ||
Please observe, that making any modifications the the KISS DP-558 will void the warrenty, so proceed at own risk | Please observe, that making any modifications the the KISS DP-558 will void the warrenty, so proceed at own risk | ||
| − | KISS DP-558 is a | + | KISS DP-558 is a highend harddisk recorder, with internet connection and FTP server and integrated online EPG (electronic Program Guide). |
The DP-558 basically consist of a Powersupply unit, a main computer board, one DVD drive, one harddisk and a front unit | The DP-558 basically consist of a Powersupply unit, a main computer board, one DVD drive, one harddisk and a front unit | ||
| Line 15: | Line 14: | ||
The harddisk is supplied by a +12 Volt (yellow) and +5 Volt (red). Ground is wired as black. When this type of error occures, both +12 volt and +5 volt linies drop in voltage. To make sure this fix is nessary for your type of error, check for the following symptoms: | The harddisk is supplied by a +12 Volt (yellow) and +5 Volt (red). Ground is wired as black. When this type of error occures, both +12 volt and +5 volt linies drop in voltage. To make sure this fix is nessary for your type of error, check for the following symptoms: | ||
| − | + | ''' Typical symptoms to look for: ''' | |
* LCD Displays only: "KISS DVD" | * LCD Displays only: "KISS DVD" | ||
* LCD Displays only: "BOOT ERR | * LCD Displays only: "BOOT ERR | ||
| Line 24: | Line 23: | ||
* Capacitors C19,C20,C15 of PSU may show leakage | * Capacitors C19,C20,C15 of PSU may show leakage | ||
* +12 volt and +5 volt supply to the KISS DP-558 harddisk is low (e.g 11 and 3 volt) | * +12 volt and +5 volt supply to the KISS DP-558 harddisk is low (e.g 11 and 3 volt) | ||
| + | |||
---- | ---- | ||
| − | + | ''' Step 1: | |
| − | |||
| − | '''Step 1: | ||
Remove mains power line, and wait at least 30 minutes before any repair is started. | Remove mains power line, and wait at least 30 minutes before any repair is started. | ||
---- | ---- | ||
| − | '''Step 2: | + | |
| + | ''' Step 2: | ||
Remove cover of the unit. | Remove cover of the unit. | ||
---- | ---- | ||
| − | '''Step 3: | + | |
| − | Located the Power Supply Module (PSU). PSU Type | + | ''' Step 3: |
| + | Located the Power Supply Module (PSU). PSU Type must be: Achme AM561B | ||
| + | |||
| + | [[File:PSU_dp558.jpg]] | ||
---- | ---- | ||
| − | '''Step 4: | + | |
| + | ''' Step 4: | ||
Disconnet the 4 power connectors from PSU module | Disconnet the 4 power connectors from PSU module | ||
---- | ---- | ||
| − | '''Step 5: | + | |
| + | ''' Step 5: | ||
Remove the 4 screws mounting the PSU to chassie | Remove the 4 screws mounting the PSU to chassie | ||
---- | ---- | ||
| − | '''Step 6: | + | |
| + | ''' Step 6: | ||
Located capacitor C19,C20 and C15 | Located capacitor C19,C20 and C15 | ||
| + | |||
| + | [[File:capacitor.jpg]] | ||
---- | ---- | ||
| − | '''Step 7: | + | |
| + | ''' Step 7: | ||
Remove the Capacitors C19,C20 and C15 | Remove the Capacitors C19,C20 and C15 | ||
| + | |||
| + | [[File:remove_capacitor.jpg]] | ||
---- | ---- | ||
| − | '''Step 8: | + | |
| + | ''' Step 8: | ||
Replace the capacitors as followes (please observe polarity of capacitors +/-): | Replace the capacitors as followes (please observe polarity of capacitors +/-): | ||
| − | C15 1000 uF 16V 105C (Type: WGR Radial, Low impedance) | + | * C15 1000 uF 16V 105C (Type: WGR Radial, Low impedance) |
| − | C19 2200 uF 16V 105C (Type: WGR Radial, Low impedance) | + | * C19 2200 uF 16V 105C (Type: WGR Radial, Low impedance) |
| − | C20 1000 uF 16V 105C (Type: WGR Radial, Low impedance) | + | * C20 1000 uF 16V 105C (Type: WGR Radial, Low impedance) |
| + | [[File:old_capacitor.jpg]] | ||
---- | ---- | ||
| − | '''Step 9: | + | |
| + | ''' Step 9: | ||
Reassemble the unit. | Reassemble the unit. | ||
Final Note: it may be a good idea to replace other capacitors if they show sign of leakage. Please also note that a capacitor may be out of order even if it show not sign of leakage. | Final Note: it may be a good idea to replace other capacitors if they show sign of leakage. Please also note that a capacitor may be out of order even if it show not sign of leakage. | ||
Latest revision as of 19:40, 22 February 2012
This page gives a step by step guide for modification of the KISS DP-558 Power Supply due to leaking/defective PSU capacitors.
The KISS DP-558 power supply has a construction error, that makes it fail, typically after beeing used 24/7 ranging from 1-3 years. The problem is proberly caused by the extensive heat that the unit generates combined low voltage capacitors (10 volt).
Mine failed after 2 years and 8 month beeing used 24/7.
Please observe, that making any modifications the the KISS DP-558 will void the warrenty, so proceed at own risk
KISS DP-558 is a highend harddisk recorder, with internet connection and FTP server and integrated online EPG (electronic Program Guide).
The DP-558 basically consist of a Powersupply unit, a main computer board, one DVD drive, one harddisk and a front unit
The harddisk is supplied by a +12 Volt (yellow) and +5 Volt (red). Ground is wired as black. When this type of error occures, both +12 volt and +5 volt linies drop in voltage. To make sure this fix is nessary for your type of error, check for the following symptoms:
Typical symptoms to look for:
- LCD Displays only: "KISS DVD"
- LCD Displays only: "BOOT ERR
- Harddisk does not spin up when unit is powered on
- It is not possible to open DVD drive
- No reaction to remote control
- Display illumination is lower than usual
- Capacitors C19,C20,C15 of PSU may show leakage
- +12 volt and +5 volt supply to the KISS DP-558 harddisk is low (e.g 11 and 3 volt)
Step 1: Remove mains power line, and wait at least 30 minutes before any repair is started.
Step 2: Remove cover of the unit.
Step 3: Located the Power Supply Module (PSU). PSU Type must be: Achme AM561B
Step 4: Disconnet the 4 power connectors from PSU module
Step 5: Remove the 4 screws mounting the PSU to chassie
Step 6: Located capacitor C19,C20 and C15
Step 7: Remove the Capacitors C19,C20 and C15
Step 8: Replace the capacitors as followes (please observe polarity of capacitors +/-):
- C15 1000 uF 16V 105C (Type: WGR Radial, Low impedance)
- C19 2200 uF 16V 105C (Type: WGR Radial, Low impedance)
- C20 1000 uF 16V 105C (Type: WGR Radial, Low impedance)
Step 9: Reassemble the unit.
Final Note: it may be a good idea to replace other capacitors if they show sign of leakage. Please also note that a capacitor may be out of order even if it show not sign of leakage.
