If you telnet to your player you can execute the command:
./nvram -list
But remember that you need to be in the correct directory
For dp-50x you need the /htmlrom/cgi-bin
For dp-558 you need the /hdd/stage2/bin
your output is something like:
(only the last lines)
Picture Random Play....................... = 00 = Off
Picture Slide Show Function............... = 00 = 5 sec
NFS Share Path1........................... = 6b697878 = kixx
NFS Share Path2........................... = 6e667320 = nfs
NFS Share Path3........................... = 20202020 =
NFS Share Path4........................... = 20202020 =
00: ff 01 00 00 ff ff
01: ff ff ff ff 0f 1e 00 ff ff ff ff
02: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
03:
04: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
05: ff ff ff 00 00 ff ff ff 00 ff ff ff
06: ff ff ff 00 ff ff ff ff ff ff 01 ff ff ff
07: ff ff ff ff ff ff ff ff ff ff ff ff ff ff
08: ff ff ff ff ff ff ff ff ff ff ff ff 00 00 ff
09: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
0a: 02 ff ff 00 ff ff ff ff ff ff ff ff ff ff ff
0b: ff ff ff ff ff ff ff ff ff ff ff ff ff
0c: ff ff ff 01 ff ff ff ff ff ff ff ff ff ff
0d:
0e: 61 2f 23 32 a8 a8 a8 c0 02 ff ff ff
0f: ff ff 00 ff ff ff ff ff ff ff ff ff ff
In the above example you see 4 nfs share path's
If you want to change the path to "/thisisnfstest/" you need to do the following commands:
./nvram -set NFSP1 this
./nvram -set NFSP2 isnf
./nvram -set NFSP3 stes
./nvram -set NFSP4 t
So you DONT use the / caracters!
if you need to remove a wrong setting you can use
./nvram -set NFSP4 " "
to fill it up with spaces
If your path is longer then 16 characters your out of luck :)
(or you just add a nfsp5 and make some changes in the scripts)
With the webconsole you can enable the option "NFS Path" to "NVRAM" and you will be able to use your customized nfspath
